xicoolee 2.13inch E-Paper Display Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, 122 x 250 Pixels Two-Colour, Supports Partial 560ms and Full 950ms Refresh SPI Interface

Description

Overview: This product is a 2.13 inch e-paper display module. It is designed based on compatible with Raspberry Pi 40PIN extension header and is intended for Raspberry Pi series motherboards. We provide the C and python demo codes using for Raspberry Pi, reserve SPI control interfaces to facilitate to connect to Ardui., STM32 and other control boards. We also provide Ardui and STM32 demo codes, which can draw dots, lines, rectangles and circles, and display number characters in English. Specifications Size: 65mm(Length)*30mm(width) Pixels: 122*250 Display Color: monochrome Voltage Translator: TXS0108EPWR Signal interface: SPI Supply voltage: 5V LCD display area: 23.7046mm (W)* 48.55mm (H) Partial Refresh: Minimum 560ms (4-wire SPI status) Global Refresh: Minimum 950ms (4-wire SPI status) Interface Definition VCC: Power supply positive (5V) GND: Power supply ground CS: SPI chip selection pin (active at low level) CLK: SPI communication SCK pin MOSI: SPI communication MOSI pin D/C: Data/command control pin (high level represents data, low level represents command) BUSY: Busy status output pin (low level indicates busy) RST: External reset pin (low level reset) Package contents: 1. 2.13inch E-Paper Display x1 2. PH2.0 8PIN connecting cable 20cm x1