Wishiot Esp32-C3-Devkitc-02 Development Board with 4 Mb SPI Flash Entry-Level ESP32-C3-MINI-1 WiFi+BT LE Module

Description

Description: RGB LED: Driven by GPIO8, Addressable RGB LED LDO: 5V-to-3.3V Low dropout voltage regulator (LDO) 5V Power On LED: When the board is powered up, the LED will light up. USB-UART bridge: Single USB-UART bridge chip provides transfer rates is 3 Mbps. Module: A standard ESP32-C3-WROOM-02 module is soldered on the ESP32-C3-DevKitM-02 board.ESP32-C3-DevKitC-02 is a general purpose module with 4 MB SPI flash and full Wi-Fi +BT LE functionality About Button: ESP32-C3-DevKitC-02 has a restart button and a download button, the restart button is used to restart the system. Press and hold Boot and then press Reset to initiate firmware download mode, which can be used to download firmware through the serial port. Pin headers: For ease interfacing and programming, most of the I/O pins are routed to headers on both sides of the board. You can choose to use jumper wires to connect peripherals or use the ESP32-C3-DevKitC-02 mounted on a breadboard. Hardware you need to have 1.ESP32-C3-DevKitC-02 2.USB 2.0 cable (Standard-A to Micro-B) 3.Computer running Windows, Linux, or macOS Your choice of power supply 1.Micro-USB Port, default power supply(recommended) 2.5V and GND pin headers 3.3V3 and GND pin headers Package Included: 1 X ESP32-C3-DevKitC-02 Development Board