Description
User guide 1. Hardware connection 1) Using the FFC cable, connect the 5inch DSI LCD to the DSI port of the Raspberry Pi. 2) For easy use, you can fix the Raspberry Pi on the backside of the 5inch DSI LCD by screws. 2. Software setting Supports Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT and Retropie systems for Raspberry Pi. 1) Download image from the Raspberry Pi website. 2) Download the compressed file to the PC, and unzip it to get the .img file. 3) Connect the TF card to the PC, use SDFormatter software to format the TF card. 4) Open the Win32DiskImager software, select the system image downloaded in step 2, and click Write to write the system image. 5) After the image has finished writing, save, and quit the TF card safely. 6) Power on the Raspberry Pi and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts. 3. Backlight Controlling 1) Open a terminal and type the following command to adjust the brightness. Note: If the command reports the ‘Permission denied’ error, please switch to the ‘root’ user mode and execute it again. echo X > /sys/class/backlight/rpi_backlight/brightness X can be value in range 0~255. The backlight is darkest if you set it to 0 and the backlight is set to lightest if you set it to 255 echo 100 > /sys/class/backlight/rpi_backlight/brightness echo 0 > /sys/class/backlight/rpi_backlight/brightness echo 255 > /sys/class/backlight/rpi_backlight/brightness 2) We can provide a example for brightness adjusting, you can download and install it. NOTE: Development Resources and Technical Support are provided, please feel free to contact us if you have any problem! 4. Package Content 1) 5inch DSI LCD (B) x1 2) FPC 15PIN 1.0 pitch 50mm (opposite sides) x1 3) Screws pack x1
Reviews
There are no reviews yet.